Air plasma spray (APS) process is used to produce high density and flowability spherical powders. Phase transformation that occurred in this process isn’t well known. In this paper, the YSZ powders have been sprayed in water to investigate the morphology changes and phase transformations via air plasma spray (APS) method. Phase analysis of powders was examined by XRD and the crystallite size an...

The removal of biofilms from microstructured titanium used for dental implants is a still unresolved challenge. This experimental study investigated disinfection and removal of in situ formed biofilms from microstructured titanium using cold atmospheric plasma in combination with air/water spray. Titanium discs (roughness (Ra): 1.96 µm) were exposed to human oral cavities for 24 and 72 hours (n...

In this research, BaTiO3 thick deposit has been successfully sprayed by air plasma spray. The microstructure and dielectric properties of thick films were investigated by secondary electron microscopy (SEM) and LCR meter respectively. XRD measurement was carried out on plasma sprayed BaTiO3. The results illustrate differences in the crystal structure between plasma sprayed coatings and feed sto...

conventional and nanostructured ysz coatings were deposited on the in-738 ni super alloy by the atmospheric plasma spray technique. the oxidation was measured at 1100°c in an atmospheric electrical furnace. according to the experimental results the nanostructured coatings showed a better oxidation resistance than the conventional ones. the improved oxidation resistance of the nanocoating could ...

the in vitro dissolution of plasma-sprayed hydroxyapatite (pha) coatings with different characteristics, produced by various spraying conditions, in a tris-buffered solution at ph 7.4 was experimentally studied through the measurement of calcium ions release with inductively coupled plasma atomic emission spectroscopy (icp-aes), and then modeled. three coating characteristics, the crystallinity...

titanium and its alloy are known as important load-bearing biomaterials. the major drawbacks of these metals are fibrous formation and low corrosion rate after implantation. the surface modification of biomedical implants through various methods such as plasma spray improves their osseointegration and clinical lifetime. different materials have been already used as coatings on biomedical implan...

rotary atomizers are commonly used in spray dryers to atomize feed. one destructive effect of wheel rotation is the creation of a vacuum inside the wheel that conducts hot air from the chamber into the wheel and can lead to atomizer blockage and an explosion. the present work determined the air-pumping characteristics of a rotary atomizer with a 50 mm wheel diameter. the vacuum pressure and pow...

The use of bioassay cages in the efficacy assessment of pesticides, application techniques, and technologies is common practice using numerous cage designs, which vary in both shape and size as well as type of mesh. The objective of this work was to examine various cage shapes and mesh types for their filtration effects on air speed, spray droplet size, and spray volume. Reductions in wind spee...